Заказать и купить изделие «Манометр МТП-60С-М1» от производителя в Спб, Москве.

The MTP-60S remote pressure gauge, showing with a bellows separator, is designed for continuous measurement of the excess pressure of non-aggressive media, including oil and fuel in diesel installations. In terms of resistance to climatic influences, the pressure gauges correspond to design B, placement category 4 in accordance with GOST 15150-69, but for operation at temperatures from minus 60 to plus 60 ° C. MTP-60S manometer technical characteristics The upper limit of measurements is 1.6 MPa. Distance capillary length 1.6; 2.5; 4.0; 6.0; 8.0; ten; 12; 16 m. Accuracy class of manometers 2.5. The maximum permissible basic error of indications, expressed as a percentage of the upper measurement limit, should be: +2.5 - for an accuracy class of 2.5. Manometers МТП-60С should be resistant to the influence of relative humidity of ambient air up to 98% at a temperature of 35оС. The pressure gauges are operational for long-term inclinations of the body in any direction up to 45 °. The pressure gauges are operable in conditions of rolling in any direction up to 45 ° with a period of 7 - 19 s. MTP-60S manometers can withstand an overload for 15 minutes with an excess pressure of 2 MPa. In terms of protection against the penetration of solid particles of dust and water, the pressure gauges comply with the IP53 design in accordance with GOST 14254-96. The pressure gauges are resistant to mold. The gauges are resistant to salt (sea) mist. The pressure gauges are resistant and durable to the effects of sinusoidal vibration according to the performance group N4 GOST 12997-84, but in the frequency range from 5 to 100 Hz. The receiver of manometers is vibration-resistant at an acceleration of 40 m / s2, a pointer at an acceleration of 15 m / s2, in the frequency range from 5 to 100 Hz. The vibration amplitude is not more than 2.5 mm. MTP-60S manometers in a shipping container in accordance with GOST 12997-84 withstand: - exposure to temperatures from minus 50 to plus 50 oC; - exposure to relative humidity (95 + 3)% at a temperature of 35 ° C; - impacts with an acceleration of 98 m / s2, a shock pulse duration of 16 ms or 1000 impacts. The filler of the remote pressure gauge system is a special liquid Т – I (or ТС – I) GOST 10227-86. The thread of the connecting nipple is М12х1.5-6Н / 6g. Weight of pressure gauges no more than 0.85 kg.