Заказать и купить изделие «Вольтметр Ц1611» от производителя в Спб, Москве.

Ts1611 voltmeters are designed to measure AC voltage with a frequency of 50 Hz and are installed on control panels and boards of electric locomotives and electric rolling stock of railways. The Ts1611 device is a panel board of a magnetoelectric system with a converter-rectifier that converts the effective value of an alternating voltage into a proportional value of a direct current. Structurally, the devices consist of a measuring mechanism, body, base and platband. The housing is made of thermoplastic plastic and has two compartments. The measuring mechanism is located in the front compartment, the transducer in the rear compartment on the base. A plastic base is attached to the rear of the case with three screws. The front part of the Ts1611 voltmeter is closed with a plastic casing with a viewing glass. Scale marks are applied on the outer raised edge of the dial in such a way that the end of the hand is in the same plane with them to eliminate parallax errors. The design of the supports provides spring damping of the moving part of the devices from shocks and vibrations, both in the axial and radial directions. Operating temperature range from –50 ° С to + 60 ° С Relative air humidity 98% at 40 ° С The devices are vibration-resistant and vibration-resistant, made in a splash-proof housing. Time to establish readings no more than 3 s Overall dimensions 120 x 120 x 166 mm Weight 1.8 kg Scale length 180 mm Scale angle 230 °