Заказать и купить изделие «вольтметр Ц1611.1» от производителя в Спб, Москве.

The Ts1611.1 voltmeter is used to measure the voltage of the alternating current of ship power plants. Instruments Ts1611.1 are designed to measure the voltage and strength of the alternating current of frequency 50 and 400 Hz of ship power plants. Ts1611.1 instruments are panel instruments of a magnetoelectric system with a converter-rectifier that converts the effective value of an alternating voltage into a proportional value of direct current. Structurally, the devices consist of a measuring mechanism, body, base and platband. The housing is made of thermoplastic plastic and has two compartments. The measuring mechanism is located in the front compartment, the transducer in the rear compartment on the base. A plastic base is attached to the rear of the case with three screws. The front part of the Ts1611.1 voltmeter is closed by a metal casing with a sight glass. The corrector screw is located in the center of the glass. Scale marks are applied on the outer raised edge of the dial in such a way that the end of the hand is in the same plane with them to eliminate parallax errors. The design of the supports provides spring damping of the moving part of the devices from shocks and vibrations, both in the axial and radial directions. Operating temperature range from –50 ° С to + 60 ° С Relative air humidity 98% at 40 ° С The devices are vibration-resistant and vibration-resistant, made in a splash-proof housing. Time to establish readings no more than 3 s Overall dimensions 120 x 120 x 166 mm Weight 1.8 kg Scale length 180 mm Scale angle 230 °