Contactor kmi 11210
The KMI-11210 contactor has four groups of normally open contacts (3 + 1 poles) and is intended, first of all, to control three-phase asynchronous AC motors with a squirrel-cage rotor. The contactor can also control lighting networks and equipment, transformers, heating circuits and various ohmic, capacitive and inductive loads. The contactors are installed both on a DIN rail and with screws. The KMI-11210 contactor can switch a three-phase load with a permissible rated current of 12 A. Thus, it is capable of switching a three-phase electric motor with a power of up to 7.5 kW. The main characteristics of the contactor can be seen below. Contactor KMI-11210 technical characteristics Rated coil voltage -230V Rated power of the electromagnetic coil -5.5 W Rated current of the main contacts -12A Operating frequency - 50 Hz Operating position - vertical Degree of protection according to GOST 14254-96 - IP20 DIN rail Dimensions of the contactor - 45 × 74 × 80 mm Operating temperature range from -40 ° to + 50 ° С Additional contacts -1 normally open contact Contactor type - no reverse The presence of a thermal relay - without a thermal relay Device weight 0.345 kg Contactor service life - 15 years.
Вы можете заказать и приобрести «Контактор кми 11210» в розницу и оптом. Сделайте заказ, а мы доставим в города: Москва, Санкт-Петербург (СПб), Астрахань, Владивосток, Волгоград, Иркутск, Казань, Калининград, Красноярск, Магадан, Мурманск, Нижний Новгород, Новороссийск, Петропавловск-Камчатский, Ростов-на-Дону, Севастополь, Тюмень, Хабаровск, Чита, Якутск и по всей России.