Заказать и купить изделие «Термометр ТКП-160Сг» от производителя в Спб, Москве.

TKP-160Sg manometric indicating signaling thermometer is designed to measure the temperature of liquid and gaseous media in stationary industrial installations and control external electrical circuits from a signaling device. Technical production conditions in accordance with TU 25-02.091870-81. Scope - electric heating boilers, water heaters, thermostats, oil transformers, saunas, temperature control of heating elements of industrial and household installations (injection molding machines, press for the manufacture of rubber goods and plastics, etc.). TKP-160Sg technical characteristics TKP-160 Sg - manometric, condensing thermometer, indicating signaling Limits of measurement, ° C from -25 to +75; from 0 to +120; from +100 to +200; from +200 to +300 Length of the connecting capillary of the remote thermometer, m 0.6; 1; 1.6; 2.5; 4; 6; ten; 12; sixteen; 25 Thermal bulb immersion length, mm 160, 200, 250, 315, 400, 500, 630, 800, 1000 Thermal bulb diameter ТКП-160 Сг, mm 12, 14, 16 (for 12Х18Н10Т thermal bulb material); 16 (for the material of the thermometer LS 59-1) Accuracy class of thermometers 1.5; 2.5 Pressure of the medium being measured, MPa, no more than 1.6 Supply voltage of the signaling device up to 220 V with a frequency of 50 Hz Breaking capacity of the contacts of the signaling device TKP-160 Сg, VA 50 Weight, kg: - remote (with a capillary 25 m) 4 , 5 - local 2.5 Average service life of TKP-160Sg-M2, years, at least 10 Thermal balloon material LS 59-1; 12Х18Н10Т Type of capillary protective sheath for remote thermometers: - copper A - polyethylene B - polyvinyl chloride System filler depending on the measurement limit technical methyl chloride GOST 12794-80 acetone GOST 2758-84 Toluene GOST 5789-78khladon GOST 8502-93 According to resistance class to external mechanical influences considered vibration-resistant. The voltage level of external switched AC circuits must be 220 Volts with a frequency of 50 Hertz for versions of the T2 and UHL2 device; 250 Volts with a frequency of 60 Hertz for the version of the TV3 device The parameter of the breaking capacity of the contacts of the TKP-160 Sg thermo-signaling device is 50 VA. The pressure level of the measured medium is up to 1.6 MPa. However, at the request of the client, it is possible to manufacture thermocylinders for nominal pressure up to 6.3 MPa, which are equipped with a protective sleeve up to 24.5 MPa. Please note that the thermowell is not included in the scope of delivery, it is produced by special order. The average service life is over 10 years.